Yamaha TENORI-ON TNR-W Manual page 92

5
Click the [EXIT] button to quit the software.
6
Insert the SD Memory Card to which the file was saved in step
TENORI-ON card slot.
7
Load the file from the SD Memory Card into a user memory. Refer to "Load
Samplings" on Page 93
User voice setup is now complete.
8
Play the user voice.
You can now select the user voice by pressing the corresponding LED button while
holding the [L1] button, in the same way as you select the internal voices.
●
Octave, transpose, and scale settings do not affect the user voices.
●
User voices are retained in memory even when the TENORI-ON is turned off.
●
In order to play a song that uses a user voice on a different TENORI-ON, the user voice file must
first be loaded into the TENORI-ON on which the song is to be played (
Page 94, and "Load Samplings" on
Setting Parameters with the Jog Dial
for details.
Page 93).
Parameter Settings
■ File Menu
4
, above, into the
➝
"Save Samplings" on
92
TENORI-ON Manual