Yamaha TENORI-ON TNR-W Manual page 14

• Menu Settings/Edits
Detailed TENORI-ON settings can be accessed and edited by using the jog dial to select
menu items on the LCD display. File save and load operations can also be accessed this
way.
[Reference]
❊
Using the Menus . . . . . . . . . . . . . . . . . . . . . . . . . Setting Parameters with the Jog Dial
Stop Playback
Adjust Overall Volume
Mute Output
Adjust Layer Panning
Apply a Reverb or Chorus Effect
Change the Light Animation
Clear All Active Notes from the Layer
Clear All Active Notes from All Layers and
Blocks
Reset All Layers and Blocks
Copy Active Notes
Change Scales
Adjust MIDI Tone Generator Tuning
Reset the Playback Loop
Determines whether notes played on the
TENORI-ON will sound via the internal tone
generator or not
Adjust the LED Button Long-press Time
File Operations
Format an SD Memory Card
Factory Reset
Record a performance
More detailed menu settings than listed in the above chart are described in the
following pages. Understand all the possibilities offered by the TENORI-ON can help
you gain maximum enjoyment from the instrument.
Performance Modes
Press the [OK] button at the point you want to stop playback while the Status
Display is shown. Press the [OK] button a second time and playback will
resume from that point.
Use the jog dial and [OK] button to go to the "Hardware Volume" display (
Page 43).
Use the jog dial and [OK] button to go to the "Mute" display (
Use the jog dial and [OK] button to go to the "Panpot" display (
Use the jog dial and [OK] button to go to the "Effect menu" display (
Page 99).
Use the jog dial and [OK] button to go to the "Animation" display (
Press the [CLEAR] button briefly. Alternatively, use the jog dial and [OK] button
to go to the "Clear this layer" display (
Press and hold the [CLEAR] button. Alternatively, use the jog dial and [OK]
button to go to the "Clear All Blocks" display (
Use the jog dial and [OK] button to go to the "Reset All Blocks" display (
Page 58).
Use the jog dial and [OK] button to go to the "Copy this block" display (
Page 55) or "Copy this layer" display (
Use the jog dial and [OK] button to go to the "Master Scale" display (
Page 44).
Use the jog dial and [OK] button to go to the "Master Tuning" display (
Page 60).
Use the jog dial and [OK] button to go to the "Reset Loop Timing" display (
Page 46).
Use the jog dial and [OK] button to go to the "Local Control" display (
Page 61).
Use the jog dial and [OK] button to go to the "Push Sensitivity" display (
Page 60).
Use the jog dial and [OK] button to go to the "File menu" display (
Use the jog dial and [OK] button to go to the "SD Format" display (
Page 107).
Use the jog dial and [OK] button to go to the "Factory Reset" display (
Page 108).
Use the jog dial and [OK] button to go to the "Recording Menu" display
➝
( Page 109).
The TENORI-ON Is ...
Basic Operation
➝
Page 36
➝
➝
Page 47).
➝
Page 53).
➝
➝
Page
➝
Page 57).
➝
Page 57).
➝
➝
➝
Page 56).
➝
➝
➝
➝
➝
Page
➝
➝
TENORI-ON Manual
53).
➝
62).
14