Push Mode - Yamaha TENORI-ON TNR-W Manual

Push Mode

The Push Mode is assigned to layer 15.
Push Mode Operation
In this mode if you press and hold an LED button the sound of the corresponding note will
begin to change gradually. The way the note changes will depend on the voice used (this
feature will only work with sustained voices that have a time-based tonal change in the
sustained portion of the voice's envelope). Voices 15/01 through 15/16 have been
specifically created for use in the Push mode, and are recommended.
The flashing surrounding the pressed button will gradually get brighter and wider.
If the button is held briefly the note and flashing will stop when you release it, but if you hold
the button for longer the note and flashing will continue even after the button is released.
To stop a note that is sounding, press the corresponding LED button (at the center of the
flashing LED buttons).
The factory default scale for the horizontal axis is an ionian scale, corresponding to the white
keys on a piano. Nothing is assigned to the vertical axis.
[Reference]
❊
Selecting a scale other than the ionian scale. (Master Scale
❊
Changing octaves. (Octave
➝
Page 26)
The TENORI-ON Is ...
Performance Modes
➝
Page 44)
TENORI-ON Manual
Push Mode
20