Yamaha TENORI-ON TNR-W Manual page 95

6
When the file name has been entered as required use the jog dial to highlight the " § "
symbol in the lower right corner of the display and press the [OK] button.
The file name will be entered and the save function will be executed.
A display like the one shown below will appear while the All Settings file is being saved.
You can cancel the operation by pressing the [OK] or [CANCEL] button.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the
"Saving..." display is showing.
●
Sampling file save operations may take a few minutes to complete.
●
If a file with the same name exists on the SD Memory Card an overwrite confirmation display like the
one shown below will appear.
●
Press the [OK] button if it's OK to overwrite the file. Press the [CANCEL] button (or use the jog dial to
select "CANCEL" on the LCD and then press the [OK] button) to cancel the operation and leave the
original file unaltered.
7
The display shown in step
Rename Samplings
●
Allows a new name to be entered for a Samplings file on an SD Memory Card.
1
Insert the SD Memory Card containing the file you want to rename into the TENORI-ON
card slot.
2
Use the jog dial and [OK] button to navigate to the Samplings function menu as follows:
"Main menu" ➝ "File menu" ➝ "Samplings"
3
Use the jog dial to highlight the "Rename" function, then press the [OK] button.
Setting Parameters with the Jog Dial
Samplings: ∞
"SAMPLE071020-01 "
Saving... CANCEL
Samplings: ∞
"SAMPLE071020-01 "
Already Exists!
Overwrite? OK
3
, above, will reappear when the operation has finished.
Samplings: ∞
Operation: Load
Samplings: ∞
Operation: Rename
Parameter Settings
■ File Menu
The Samplings file being saved.
95
TENORI-ON Manual