Recording To [Track2] - Yamaha Clavinova CLP-970 Owner's Manual

Ending methods:
Replace – The data after the point you stop recording will also be
erased.
Punch Out — The data after the point you stop recording will remain.
3-2
Keep holding down the [REC] button and press the
[TRACK 1] button.
The [TRACK 1] indicator flashes in red.
(To stop recording, press the [REC] button again or press the [STOP]
button.)
Follow the procedure beginning with Step 4 on page 42.

Recording to [TRACK2]

This section explains how to record another part on the second track.
CLP-970 DEMO SONG SELECT
NEW SONG
SONG BALANCE
MIN MAX TRANSPOSE
MASTER VOLUME
Procedure
1.
Select a voice.
Select a voice (or voices) for recording.
Repeat Step 2 on page 42.
2.
Enter record mode and select a recording track.
Press and hold down the [REC] button and press the
[TRACK 2] button.
The [TRACK 2] indicator flashes in red. (To cancel recording, press
the [REC] or [STOP] button.)
Make the recording by following the procedure beginning with Step 4 on page 42.
You can record a new part while listening to playback of the recorded [TRACK 1] data.
2
TRACK TRACK EXTRA FILE METRONOME
A
1 2 TRACKS START/ STOP SETTING
STOP START/ REC SONG DOWN UP
PAUSE SETTING
SYNCHRO START
C
SONG TEMPO
2
Recording Your Performance
If you cancel recording by
pressing the [REC] button,
recording stops when you
press the button. If you can-
cel recording by pressing
the [STOP] button, the Clavi-
nova locates the top of the
song.
1
PIANO E. PIANO/ HARPSI- MALLET ORGAN STRINGS/
B CONTRAST
BASS CHORD CHOIR
MAIN
NO YES
PIANO/ HARPSI/ ORGAN/ BASS
SPLIT VOICE
POINT E. PIANO MALLET STRINGS SETTING
EXIT LEFT
D
VOICE
Pressing the [TRACK 1] but-
ton repeatedly toggles
between playback on (the
indicator lights up in green)
and off (the indicator turns
off).
TIP
REVERB CHORUS MIDI
SETTING
OTHER
BRILLIANCE
SETTING
EFFECT
TIP
45
CLP-970