Yamaha Clavinova CLP-970 Owner's Manual page 42

Recording Your Performance
2.
Select a voice.
Select a voice (or voices) for recording (see page 30).
Set the other parameters, such as reverb and chorus.
Adjust the [MASTER VOLUME] slider to set the volume level to suit
your preference. You can also use the slider to adjust the level during
playback.
After you set the tempo or if the record standby screen does not
appear, press one of the SONG SELECT [
return to the New Song screen.
3.
Enter record mode and select a recording track.
Press and hold down the [REC] button and press the
[TRACK 1] button.
The [TRACK 1] indicator flashes in red. (To cancel recording, press
the [REC] or [STOP] button.)
Record standby screen
Set the tempo, if necessary.
If this record standby screen does not appear, press one of the SONG
SELECT [
4.
Start and stop recording.
Recording begins automatically as soon as you play a
note on the keyboard.
(Optional) Press the [START/PAUSE] button to start recording.
The recording screen displays the current measure number.
Record screen
To stop recording, press the [STOP] button. The Clavinova
locates the top of the song.
The [TRACK 1] indicator lights up in green. (Record mode is auto-
matically cancelled.)
42
CLP-970
A
C
] [ ] buttons once.
A
C
] [ ] buttons once to
B
NO YES
D
B
NO YES
D
Measure number in recording
NOTE
Set the tempo in Step 3.
NOTE
See page 49 for more infor-
mation on recording in Dual/
Split mode.
TIP
You can record data while
using the metronome. The
metronome is not recorded.
TIP
When you press the
[START/PAUSE] button dur-
ing recording, recording is
paused. To resume record-
ing, press the [START/
PAUSE] button again or play
a note on the keyboard.
TIP
When you press the [REC]
button, recording pauses.