Connecting A Personal Computer - Yamaha Clavinova CLP-970 Owner's Manual

6
MIDI [IN], [OUT], [THRU] connectors
Use MIDI cables to connect external MIDI devices to these connectors.
Make sure you set the HOST SELECT switch (described on the privious page)
to MIDI when you use these connectors.
7
PEDAL jack
Connect the pedal cord from the pedal box. (Refer to "Keyboard Stand
Assembly" on pages 106-108.)

Connecting a personal computer

You can enjoy computer music data on the Clavinova by connecting a computer to the TO HOST (or MIDI)
jack.
"The Clavinova-Computer Connection" is a supplementary guidebook that describes, for beginners, what
you can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer sys-
tem (the manual is not written for any specific models). The document is available as a PDF file (in
English) at the following Internet address:
Clavinova Web site:
http://www.yamaha.co.jp/english/product/cl/
Yamaha Manual Library (Electronic Musical Instruments):
http://www2.yamaha.co.jp/manual/english/
(You need to register first. Check the Clavinova web page.)
There are the three methods by which to connect the Clavinova to a personal computer:
1. Connecting the serial port on the computer to the Clavinova's TO HOST jack (page 64)
2. Using a MIDI interface and the Clavinova's MIDI connectors (page 66)
3. Using the USB port on the computer and the UX256, a USB interface (page 67)
For more information, refer to the following pages.
TIP
When connecting the Clavinova to a personal computer, first turn off the power to both the Clavinova and the computer
before connecting any cables and setting the HOST SELECT switch. After making connections and switch settings, turn
on the power to the computer first, then to the Clavinova.
TIP
If you do not use the TO HOST jack of the Clavinova, make sure you disconnect the cable from the jack. If the cable is left
connected, the Clavinova may not function properly.
TIP
When the HOST SELECT switch is set to "PC-1," PC-2," or "Mac," you can use the TO HOST jack, but the MIDI connec-
tors are disabled since no data transfer occurs via the MIDI connectors. On the other hand, when the HOST SELECT
switch is set to "MIDI," you can use the MIDI connectors, but not the TO HOST jack since no data is transferred via the TO
HOST jack.
Connections
63
CLP-970