Detailed Settings For The Voices [Voice Setting]; Setting The Octave [Octave]; Setting The Volume Level [Volume] - Yamaha Clavinova CLP-970 Owner's Manual

Detailed settings for the voices
[VOICE SETTING]
This menu enables you to make various detailed settings for the voices in Dual or Split mode and the effects. You can
make these settings for each voice (or each combination of voices) individually. You can listen to the notes you play
on the keyboard while changing the settings.
Procedure
1.
Select a voice and press the [VOICE SETTING] button to access the
"Voice Setting" menu.
DEMO
CLP-970
TRANSPOSE
MIN MAX
MASTER VOLUME
2.
Press the A [–]/[+] buttons to select the part for which you wish to
change the voice.
The range of the displayed part varies depending on the selected voice.
[Main]
[Main Layer] MAIN Voice 1 and Voice 2 (displayed when the MAIN side is in Dual
[Left]
[Left Layer] LEFT Voice 1 and Voice 2 (displayed when the LEFT side is in Dual mode)
TIP
In Dual mode, parameters with the "*" mark are set for Voice 1 and Voice 2 individually.

Setting the octave [Octave]*

You can shift the pitch up and down in octave steps.
See the procedure on page 72.
A
C
In Dual mode:
A
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
–2 (two octaves lower - 0 (no pitch shift) - +2 (two
octaves higher)
78
CLP-970
SONG SELECT TRACK TRACK EXTRA FILE METRONOME
1 2 TRACKS START/ STOP SETTING
NEW SONG
SONG BALANCE START/ REC SONG
STOP DOWN UP
PAUSE SETTING
SYNCHRO START
SONG TEMPO
MAIN voices (displayed with a single voice or in Split mode)
mode)
LEFT voice (displayed in Split mode)
B
NO
D
B
NO
D
A B CONTRAST
NO YES
C D
Setting the volume level
[Volume]*
You can set the volume level for each voice part.
See the procedure on page 72.
YES
A
C
YES
PIANO E. PIANO/ HARPSI- MALLET ORGAN STRINGS/ REVERB CHORUS
BASS CHORD CHOIR
MAIN
SPLIT PIANO/ HARPSI/ ORGAN/ BASS VOICE
POINT E. PIANO MALLET STRINGS SETTING
EXIT LEFT
VOICE
[VOICE SETTING]
MIDI
SETTING
BRILLIANCE OTHER
SETTING
EFFECT
B
NO YES
D