Recording To [Track2] - Yamaha PF-500 Owner's Manual

Ending methods:
Replace – The data after the point you stop recording will also be
erased.
Punch Out — The data after the point you stop recording will remain.
3-2
Keep holding down the [REC] button and press the
[TRACK 1] button.
The [TRACK 1] indicator flashes in red.
(To stop recording, press the [REC] button again or press the [TOP]
button.)
Follow the procedure beginning with Step 4 on page 36.

Recording to [TRACK2]

This section explains how to record another part on the second track.
SONG SELECT
SONG KEYBOARD
NEW SONG
MIN MAX
MASTER VOLUME SONG BALANCE DEMO
Procedure
1.
Select a voice.
Select a voice (or voices) for recording.
Repeat Step 2 on page 36.
2.
Enter record mode and select a recording track.
Press and hold down the [REC] button and press the
[TRACK 2] button.
The [TRACK 2] indicator flashes in red. (To cancel recording, press
the [REC] or [TOP] button.)
Make the recording by following the procedure beginning with Step 4 on page 36.
You can record a new part while listening to playback of the recorded [TRACK 1] data.
2
EXTRA METRONOME
TRACK TRACK
A
1 2 TRACKS FILE START/STOP SETTING
TOP START/STOP REC SONG
SETTING DOWN UP
SYNCHRO START
C
SONG TEMPO
Recording Your Performance
If you cancel recording by
pressing the [REC] button,
recording stops when you
press the button. If you can-
cel recording by pressing
the [TOP] button, the PF-
500 locates the top of the
song.
1
GRAND GRAND E.PIANO E.PIANO HARPSI- E.CLAVI- VIBRA-
CONTRAST
B
PIANO 1 PIANO 2 1 2 CHORD CHORD PHONE
NO YES
CHURCH JAZZ SYNTH. WOOD
ORGAN ORGAN STRINGS CHOIR PAD BASS E.BASS
EXIT EXIT
D
VOICE
Pressing the [TRACK 1] but-
ton repeatedly toggles
between playback on (the
indicator lights up in green)
and off (the indicator turns
off).
TIP
VOICE MIDI
GUITAR SETTING SPLIT REVERB CHORUS SETTING
BRILLIANCE OTHER
XG VARIATION MELLOW BRIGHT SETTING
EFFECT
TIP
39
PF-500