Setting The Speed Of Vibraphone's Vibrato Effect [Vibraphonerotorspeed]; Selecting A Pedal Function For Vibraphone [Vibraphonepedalmode]; Assigning The Start/Pause Function To A Pedal [Pedalstart/Pause]; Selecting A Type Of Auxiliary Pedal [Auxpedaltype] - Yamaha Clavinova CLP-970 Owner's Manual

Setting the speed of vibraphone's
vibrato effect [VibraphoneRotor-
Speed]
This parameter enables you to set the speed of vibrato
when you select the Vibraphone voice and use a vibe
rotor pedal.
See the procedure on page 72.
A
C
Setting range:
1 - 10, Off
Selecting a pedal function for
vibraphone
[VibraphonePedalMode]
This parameter enables you to select whether the
sound is sustained while you press the keys on the key-
board ("PianoLike") or the sound is sustained only
while you press and hold down the sustain pedal, like
playing a real vibraphone ("Normal").
See the procedure on page 72.
A
C
Setting range:
PianoLike, Normal
Normal setting:
PianoLike
Assigning the START/PAUSE func-
tion to a pedal [PedalStart/
Pause]
If you assign the START/PAUSE function to a pedal and turn
the function On, the pedal function assigned to the pedal in
the Voice Setting menu (pages 81 and 82) is disabled.
See the procedure on page 72.
B
NO YES
A
D
C
Select a pedal to assign the function.
Setting for:
Left, Middle, AUX
Setting range:
On/Off
Normal setting:
Off for all pedals
Selecting a type of auxiliary pedal
[AuxPedalType]
A pedal connected to the [AUX PEDAL] connector
B
may switch on and off differently. For example, some
pedals turn on the effects and others turn them off
NO YES
when you press them.
Use this parameter to reverse this mechanism.
D
See the procedure on page 72.
A
C
Setting range:
Make, Break
TIP
Other settings
B
NO YES
D
Set to On or Off.
B
NO YES
D
89
CLP-970