Setting range:
DelayLCR
Delay applied at left, center, and right
positions.
DelayLR
Delay applied at left and right posi-
tions.
Echo
Echo-like delay
CrossDelay
Left and right delays are crossed.
Symphonic
Adds a rich and deep acoustic effect.
RotarySpeaker
Adds the vibrato effect of a rotary
speaker.
Tremolo
The volume level changes in rapid
cycles.
VibeRotor
The vibrato effect of a vibraphone.
AutoPan
The sound pans left to right and back
and forth.
Phaser
The phase changes periodically,
swelling the sound.
AutoWah
The center frequency of the wah filter
changes periodically.
SoundBoardRev Simulates the reverberation of a
piano soundboard.
Off
No effect.
Setting the variation effect depth
[VariationSend]*
See the procedure on page 72.
A
C
In Dual mode:
A
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
Detailed settings for the voices [VOICE SETTING]
Setting the touch sensitivity
[TouchSense]*
This parameter enables determines the manner and
degree to which the volume level changes in response
to your touch on the keyboard (how hard you play).
Since the volume level of the harpsichords and pipe
organs do not change regardless of how you play the
keyboard, the normal setting for these voices is 127.
(See the setting range below.)
See the procedure on page 72.
A
C
In Dual mode:
A
C
Setting range:
0 (softest) - 64 (largest changes in the level) - 127
(loudest and fixed)
B
Setting the right pedal function
NO
YES
[RPedal]
D
See the procedure on page 72.
A
B
NO
YES
C
D
Setting range:
SustainCont Damper function that sustains the
Sustain
PitchBend
Off
Normal setting:
SustainCount
Voice for editing (Voice 1 or Voice 2)
sound longer as you press the pedal
deeper.
On/Off switch type damper function.
Changes the pitch continuously.
No function.
B
NO
YES
D
B
NO
YES
D
B
NO
YES
D
81
CLP-970