Table of Contents
Advertisement
3
Load the Transparencies:
(a) With the print side facing up, place one sheet of plain paper under the
stack. Load the stack with the edges aligned against the right side of the
auto sheet feeder.
(b) Adjust the paper guide to the left side of the stack. You can print on
either side of transparencies, but using a slightly curled surface as a
print side is recommended.
Note
You can load up to 30 transparencies in the auto sheet feeder.
Print side
Plain paper
(b)
(a)
Using Transparencies
Print side
Printing on Paper and Other Media
67
Advertisement
Table of Contents
