Download  Print this page

Canon Printers User Manual

Direct printer user guide (general).
Hide thumbs

Advertisement

Direct Print User Guide
You don't even need a computer !
Just connect your camera to your printer and print

Advertisement

Table of Contents

   Related Manuals for Canon Printers

   Summary of Contents for Canon Printers

  • Page 1 Direct Print User Guide You don’t even need a computer ! Just connect your camera to your printer and print...
  • Page 2 ENGLISH Introduction —Confirm Your Printer Model and the Section that Applies to You Operations differ according to your printer model. According to the procedure below, confirm the section and page you should read in this user guide. Connect the camera to the printer with an appropriate cable and confirm the icon displayed in the camera's LCD monitor.
  • Page 3 " Printing with Non-Canon, printers* PictBridge Compliant Printers" Page 53 SELPHY CP " Printing with SELPHY CP series Series Printers using Canon Direct Print" Page 71 Bubble Jet " Printing with Bubble Jet printers Printers using Bubble Jet Direct" * Please also refer to the user guide that came with your printer.
  • Page 4 Canon. • Canon reserves the right to change the specifications of the hardware described herein at any time without prior notice.
  • Page 5: Table Of Contents

    Printing with SELPHY ES Series/SELPHY CP Series Printers using PictBridge ..... . . 10 Printing ........10 Easy Print.
  • Page 6 Printing with SELPHY CP Series Printers using Canon Direct Print......53 If you use Canon Compact Photo Printer SELPHY CP730/CP720/CP710/CP510 .
  • Page 7 PictBridge ......75 SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct ..77...
  • Page 8: Direct Print

    Or, prints with a border. Add the date. 09/09/2006 Specify which portion of the image to print. (Trimming) Multiple pictures can be printed at once. (DPOF print setting) * Some settings may not be selectable for Non-Canon printers.
  • Page 9: You Can Also Perform The Following Printing Operations

    • Capable printers: Printers using PictBridge (Including non-Canon Printers) (This function is not available on some printers.) ID Photo Print An image can be trimmed, laid out and printed as ID photos (pp.
  • Page 10: Connecting The Camera To The Printer

    Printer: Refer to the printer’s user guide. This illustration shows the PowerShot A710 IS as an example. Some printers require specific connection cables which differ from the above cable. Please refer to the printer’s user guide. Turn the printer’s power on.
  • Page 11: Disconnecting The Camera And The Printer

    Disconnecting the Camera and the Printer Detach the cable from the printer. Pull out the cable while holding the connector plug. Do not pull out by the cable. Turn the camera’s power off. Detach the cable from the camera. Pull out the cable while holding the connector plug. Do not pull out by the cable.
  • Page 12: Printers Using Pictbridge

    Printing with SELPHY ES Series/ SELPHY CP Series Printers using PictBridge Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Make sure that displays in the upper left corner of the LCD monitor.
  • Page 13: Print After Changing The Print Settings

    LCD monitor. displays on the LCD monitor, please refer to Printing with SELPHY CP Series Printers using Canon Direct Print 53). Display the images you wish to print and press the SET Sets the print button.
  • Page 14: Cancel Printing

    • You cannot print RAW images. • It may not be possible to play back or print images shot with a different camera. • You may not be able to print if the memory card holds a large number of images (about 1000). Cancel Printing •...
  • Page 15: Selecting Print Settings

    Selecting Print Settings Default Setting • The Default option is a fixed setting of the printer. • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. Setting the Date and the File Number Printing Option Select [ ], then select the...
  • Page 16: Setting The Print Effect

    Setting the Print Effect This function uses the camera’s shooting information to optimize the image data, yielding high quality prints. You can select the following print effects. Uses the camera’s shooting information to deliver optimum prints. Prints without any effects. Default Print settings differ according to your printer model.
  • Page 17: Setting The Printing Area (trimming)

    Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 19) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. Select [Trimming] and press the SET button.
  • Page 18 When screen displays Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 19 When screen displays Trim the image. Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 20 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 21: Selecting The Paper Settings

    Selecting the Paper Settings Select [Paper Settings] and press the SET button. The paper size setting screen appears. Select a paper size and press the SET button. The default settings and specified paper cassette size are displayed. The paper type setting screen appears.
  • Page 22 Select a layout. The following layout can be selected. Default Print settings differ according to your printer model. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up Prints 2, 4 or (8*) images on a single sheet of paper 21).
  • Page 23: Printing Multiple Images On A Sheet Of Paper

    Printing Multiple Images on a Sheet of Paper Selecting [N-up] in the layout setting (p. 20) will allow you to specify the following layout settings. 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper.
  • Page 24: Printing By Specifying The Print Size (id Photo Print)

    Printing by Specifying the Print Size (ID Photo Print) Selecting [ID Photo] in the layout setting (p. 20) will allow you to specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo.
  • Page 25: Print Area

    Selectable combination : Available print size Short Side 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.5 inch 1.8 inch...
  • Page 26: Printing Images In The Fixed Size

    Printing Images in the Fixed Size Selecting [Fixed Size] in the layout setting (p. 20) will allow you to print by specifying the print size of the image on a sheet of paper. Select the fixed print size required. Depending on the paper size, you can select print sizes as follows: Paper size Print size...
  • Page 27: Printing Movies (movie Print)

    Printing Movies (Movie Print) Select the movie you want to print, then press the SET button. The movie control panel appears. Single-frame You can choose a single frame from a movie and print it on a sheet of paper. Display the frame you wish to print on the LCD monitor, select (Print), then press...
  • Page 28: Sequence-frame

    Select [Print] and press the SET button. Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Select (Print) and press the SET button. Movie Control Panel Select and choose [Sequence]. If necessary, select [On], [Off] or [Default] in (Caption).
  • Page 29 • If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) •...
  • Page 30: Specifying And Printing Multiple Images (setting The Dpof Print Settings)

    Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide.
  • Page 31 • To print the date, set the [Date] setting in [Print Settings] on the screen in Step 1 to [On]. You cannot set the date to print in Step 2. • When the print type is set to [Index], the [Date] and [File No.] cannot be printed at the same time.
  • Page 32 Cancel Printing • To cancel printing between images printed, press the SET button. A confirmation dialog appears. Select [OK] and press the SET button. The printer will stop printing the current image and eject the paper. Restarting Printing • Select [Resume] and press the SET button. The remaining images can be printed.
  • Page 33: List Of Messages

    List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) Please refer to the printer’s user guide for solutions. Paper cassette is incorrectly inserted or out of No Paper paper.
  • Page 34: Selphy Ds Series) Using Pictbridge

    Printing with Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge Printing Easy Print You can print images by pressing only one button after connecting the camera to the printer. Make sure that displays in the upper left corner of the LCD monitor.
  • Page 35: Print After Changing The Print Settings

    LCD monitor. displays on the LCD monitor, please refer to Printing with Bubble Jet Printers using Bubble Jet Direct 71). Display the images you wish Sets the print to print and press the SET effect (p.
  • Page 36 See List of Messages (p. 50) for details. • On printers equipped with an operation panel, an error number or message displays on the panel. Please refer to the printer user guide for the remedies corresponding to the error numbers...
  • Page 37: Selecting Print Settings

    • The [Date/File No.], [Print Effect], paper setting [Paper Size], [Paper Type] and [Page Layout] options are available. • On printers equipped with an operation panel, you can change the settings for those items set to [Default] using the printer's operation panel.
  • Page 38: Setting The Print Effect

    If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [ ] will be set to [Off]. If you select [Date], [File No.] or [Both], the date/file number will be printed on the embedded information which is also printed.
  • Page 39: Setting The Number Of Copies

    Setting the Number of Copies Select [ ] and set the number of prints. 1 to 99 copies can be set.
  • Page 40: Setting The Printing Area (trimming)

    Setting the Printing Area (Trimming) You can specify a portion of the image for printing. Please set [Paper Settings] (p. 42) before setting the trimming settings. If [Paper Settings] is changed after having made the trimming settings, you must select the settings again. Select [Trimming] and press the SET button.
  • Page 41 When screen displays Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 42 When screen displays Trim the image. Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 43 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 44: Selecting The Paper Settings

    Selecting the Paper Settings Select [Paper Settings] and press the SET button. The paper size setting screen appears. Select a paper size and press the SET button. The following paper sizes* are available: 4" × 6", 5" × 7", 13 × 18 cm, 8.5" × 11", A4, CreditCard, 8"...
  • Page 45 Select a layout. The following layout can be selected. Bordered Prints with a border. Borderless Prints right to the edges of the paper. N-up* Prints 2, 4, 9 or 16 images on a single sheet of paper 44). Prints the shooting Bordered information* onto a...
  • Page 46: Printing Multiple Images On A Sheet Of Paper

    Printing Multiple Images on a Sheet of Paper • Selecting [4" x 6"] in the paper size setting (p. 42) will allow you to specify the following layout settings. 2 images (height 2 x width 1) of the same dimensions are arranged on a single sheet of paper. 4 images (height 2 x width 2) of the same dimensions are arranged on a single sheet of paper.
  • Page 47 •When [Plain] is selected in the camera's [Paper Type] (cannot be selected depending on the connected printer model). •With printers equipped with an operation panel, when [Plain] is selected with the printer and [Default] is selected in the camera's [Paper Type].
  • Page 48: Printing Movies (movie Print)

    Printing Movies (Movie Print) You can choose a single frame from a movie and print it on a sheet of paper. Select the movie you want to print, then press the SET button. The movie control panel appears. Display the frame you wish to print on the LCD monitor, select (Print), then press...
  • Page 49: Specifying And Printing Multiple Images (setting The Dpof Print Settings)

    Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide.
  • Page 50 • To print the date, set the [Date] setting in [Print Settings] on the screen in Step 1 to [On]. You cannot set the date in Step 2. • When the print type is set to [Index], both the [Date] and [File No.] cannot be printed depending on the printer.
  • Page 51 See List of Messages (p. 50) for details. • On printers equipped with an operation panel, an error number or message displays on the panel. Please refer to the printer user guide for the remedies corresponding to the error numbers...
  • Page 52: List Of Messages

    You can restart printing if you select [Continue] in the error screen. Please request replacement of the ink absorber from your nearest Canon Customer Ink absorber full Support center listed in the contact list provided with the printer or in the user guide.
  • Page 53 Then reconnect the cable and turn on the printer. If the error persists, please Printer error request a repair from your nearest Canon Customer Support Center (listed in the contact list provided with the printer). The printer is in use now. The printer automatically...
  • Page 54: Printing With Non-canon, Pictbridge Compliant Printers

    LCD monitor. After this step, follow the procedures in the section Printing with Bubble Jet Printers (PIXMA series/SELPHY DS series) using PictBridge (p. 32) to print your images. However, the following menu options cannot be set.
  • Page 55: Canon Direct Print

    Printing with SELPHY CP Series Printers using Canon Direct Print If you use Canon Compact Photo Printer SELPHY CP730/CP720/CP710/CP510 When printing, on wide-size paper, an image that has been shot using a Canon digital camera’s (wide) size, select from [Print Method] on the camera’s (Set up) menu.
  • Page 56: Print After Changing The Print Settings

    LCD monitor. displays on the LCD monitor, please refer to Printing with SELPHY ES Series/SELPHY CP Series Printers using PictBridge 10). Display the images you wish Selects the Number of to print and press the SET Copies (p.
  • Page 57: Selecting Print Settings

    Cancel Printing • You cannot stop printing when printing only one copy of an image. If you are printing more than one copy or more than one image, you can cancel the rest of the printing by pressing the SET button. Once the current print is finished, a confirmation dialog appears.
  • Page 58 In the print order screen, select [Style] and press the SET button. Select [Image], [Borders], or [Date]. Select settings as needed. Press the MENU button to end the setting selection process. With borderless or multiple prints, the top, bottom and sides of the image may be cropped slightly.
  • Page 59: Setting The Printing Area (trimming)

    • When printing multiple prints, the [Borders] and the [Date] cannot be set. (Images are printed without any date or borders.) • Practically all of the image area displayed on the LCD monitor is printed on bordered prints. Setting the Printing Area (Trimming) You can specify which portion of an image gets printed.
  • Page 60 When screen displays Trim the image. Changing the Size of the Trimming Frame • Press the zoom lever or the zoom button to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 61 When screen displays Trim the image. Changing the Size of the Trimming Frame • Press the up and down buttons to adjust the size of the trimming frame. • The trimming frame can be changed to a minimum selection of approximately half the displayed image (in width and height) or a maximum selection that is virtually the same size as the image.
  • Page 62 • The trimming setting only applies to one image. • The trimming setting is canceled with the following operations. • When you set the trimming settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 63: Printing By Specifying The Print Size (id Photo Print)

    Printing by Specifying the Print Size (ID Photo Print) You can specify the print size and print portion of an image or a whole image as an ID photo*. * Images printed with the ID Photo Print function may not be allowed as a formal certificate photo.
  • Page 64: Selectable Combination

    Selectable combination : Available print size Short Side 20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm 70 mm 1.4 inch 1.5 inch 1.8 inch...
  • Page 65 • The print size setting only applies to one image. • The print size setting is canceled with the following operations: • When you set the print size settings for another image. • When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the connection cable).
  • Page 66: Printing Movies (movie Print)

    Printing Movies (Movie Print) Select the movie you want to print, then press the SET button. The movie control panel appears. Single-frame You can choose a single frame from a movie and print it on a sheet of paper. Display the frame you wish to print on the LCD monitor, select (Print), then press...
  • Page 67: Sequence-frame

    Select [Print] and press the SET button. Sequence-frame You can print movie frames selected automatically at fairly regular intervals on a sheet of paper. Select (Print) and press the SET button. Movie Control Panel Select and choose [Sequence]. If necessary, select [On] or [Off] in (Caption).
  • Page 68 • If you press the button instead of the SET button in Step 1, movie print begins. • The number of printed movie frames per sheet of paper with [Sequence] is determined by the paper size shown as follows: (Depending on the number of seconds in the movie, there are cases when the number of frames indicated below will not be printed.) •...
  • Page 69: Specifying And Printing Multiple Images (setting The Dpof Print Settings)

    Specifying and Printing Multiple Images (Setting the DPOF Print Settings) With the camera’s (Print) menu, you can specify and print multiple images or all the images on a memory card. For instructions on how to specify images, please refer to Setting the DPOF Print Settings section of the Camera User Guide.
  • Page 70 • To print the date, set the [Date] setting in [Print Settings] on the screen in Step 1 to [On]. You cannot set the date to print with the [Style] menu in Step 2. • When the print type is set to [Index], the [Date] cannot be printed.
  • Page 71 Printing Errors • An error message appears if an error occurs for some reason during the printing process. Select [Stop] or [Resume] and press the SET button. * The [Resume] option may not appear with some types of errors. In that case, select [Stop].
  • Page 72: List Of Messages

    List of Messages The following messages may appear on the camera’s LCD monitor when an error occurs during a camera and printer connection. (Depending on the printer model, some messages may not display.) • Please refer to the printer’s user guide for solutions. Paper cassette is incorrectly inserted or out of No Paper paper.
  • Page 73: Printing With Bubble Jet Printers Using Bubble Jet Direct

    DS series) using PictBridge 32). After this step, follow the procedures in the section Printing with SELPHY CP Series Printers using Canon Direct Print (p. 53) print your images. However, please note that some menus and precautions differ, as listed below.
  • Page 74: Setting The Print Style

    [Stop], press the SET button and restart the print job. • With printers equipped with an operation panel, the error number displays on the panel. Please refer to the printer user guide for the remedies corresponding to the error numbers.
  • Page 75: See Page

    • The ID photo print function cannot be used. • If you select an image which has had the shooting date embedded in it using a camera with the Postcard Date Imprint mode, [Date] in the [Style] menu will be set to [Off]. If you set [Date] to [On], dates will appear twice on the printed image.
  • Page 76: Settings That Can Be Set With The Camera

    Settings that Can Be Set with the Camera SELPHY ES Series/SELPHY CP Series Printers using PictBridge (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Date File No. Date/File No. Both Default Print Effect...
  • Page 77: Bubble Jet Printers (pixma Series/selphy Ds Series) Using Pictbridge

    Bubble Jet Printers (PIXMA series/ SELPHY DS series) using PictBridge (When appears on the camera’s LCD monitor during a connection) Print Options Selectable with the Camera Date File No. Date Both Default Vivid Print Effect Vivid+NR Face Red-Eye1 Red-Eye2 Default...
  • Page 78 4" × 6" 13 × 18 cm 5" × 7" 8.5" × 11" CreditCard 8" × 10" Paper Size* 10" × 12" A3+/13" × 19" 14" × 17" 4" × 7.1" Default Photo Paper Settings Fast Photo Fine Art Paper Type Semi-gloss Plain Default...
  • Page 79: Selphy Cp Series Printers Using Canon Direct Print Bubble Jet Printers Using Bubble Jet Direct

    SELPHY CP Series Printers using Canon Direct Print Bubble Jet Printers using Bubble Jet Direct (When appears on the camera’s LCD monitor during a connection) SELPHY Bubble Jet CP series Printers Printers Print Options Selectable with the Camera using using...
  • Page 80 CEL-SF8VA211 © 2006 CANON INC.

Comments to this Manuals

Symbols: 0
Latest comments: