Tools You Will Need - LG SIGNATURE OLED77G7V Safety And Reference

Provided item
AV box fixing supporter /
Wall mount spacer
x 2 x 2
(Only OLED65/77W7V)
Provided item
Wall mounting anchor
Wall mount
• Check the material of the wall and the thickness of the finishing.
• Use the Wall mount anchor for wall material of concrete, light
concrete, strong natural stone, soft natural stone masonry brick and
hallow block that do not crack.
Wall Material
Wall mount spacer
Concrete
Brick
Natural stone
x 2
Metal Panel
Plywood
EPS Panel
Plasterboard +
Plywood
• Do not mount the device on the walls made from plasterboard or
medium density fiberboard (MDF). In this case, the anchor and screws
must be inserted into the concrete behind the finish surface. If there
is no concrete on the other side, then you must first install a separate
hanger to securely install the anchors and screws.
• When installing the product on wall material not designated, install
the product so that each location can withstand the pull out load of
70 kgf (686 N) and shear load of 100 kgf (980 N) or above.
• Use the Ø 8 mm drill bit for concrete and hammer (Impact) drill.

Tools you will need

• Phillips head + driver (manual or motorized), Ø 3/6/8 mm Drill bit,
Level, Stud finder, Drill
Wall mounting screw
Punching Guide
Tools Wall Width
Wall mounting
anchor, Wall
70 mm
mounting screw,
Ø 3/6/8 mm Drill bit
30 mm
Wall mounting
Penetrate the wall
screw, Ø 3 mm
Drill bit
30 mm
9