VeEX OTDR FX150+ Series User Manual page 79

The following information can be pre-set and automatically saved in the file (Page 4).
• Originating location: where fiber starts
• Terminating location: where fiber ends
• Operator: name of operator
• Comments: Add information about the fiber ends, comment about the result, status or
any other meaningful information about connector, application, or case. This information
will be included in the report.
To view a saved result, select the Results tab to see the screen below. To push test results to
your Cloud account, just select the Push command for the folder that you wish to upload to the
Cloud.
Save: Saves file when autosave is disabled.
Load: Displays selected trace for viewing.
Modify: Renames or removes selected file.
Pull: When connected, pulls file from Fiberizer Cloud onto test set.
USB Export: Exports selected test results to USB stick using standard MyVeEX tree directory
format or a flat file when all files should be saved in a single folder.
Alternatively, you can access files and copy To USB stick via Utilities>Files>Saved. Each
trace will be saved in a separate file folder.
OTDR Series e-Manual, D07-00-076P-RevD00
Results tab
Page 79 of 109