Switching Off - SGS SC8H Owner's Manual

OPERATION
3. Set the regulator to the correct pressure for the air tool (check in the
air tool manual). The output pressure is shown on the right gauge.
The left hand gauge shows the tank pressure.
WWW.SGS-ENGINEERING.COM

SWITCHING OFF

1. Push down on the on/off switch
to turn the compressor off.
2. Operate the air tool to depres-
surise the air hose.
3. Disconnect the tool from the
hose.
4. Open the drain cock to remove
any condensation from the
compressor.
PAGE 10 PAGE 11