Hbacmd Command - NEC NE3390-159 User Manual

Hbacmd command

ListHBAs
This command shows a list of the manageable Fibre Chanel adapters.
Syntax
Listhbas
AllNodeInfo
This command shows target node information for each target accessible by the adapter.
Syntax
AllNodeInfo <WWPN>
Parameters
<WWPN>
The WWPN address of the adapter.
PersistentBinding
This command specifies which set of persistent binding information (configuration or live state) is
requested.
Syntax
PersistentBinding <WWPN> <Source>
Parameters
<WWPN>
The WWPN address of the adapter.
<Source>
C = Configuration support
L = Live support
RemoveAllPersistentBinding
This command removes all persisting bindings for the adapter.
Syntax
RemoveAllPersistentBinding <WWPN>
Parameters
<WWPN>
The WWPN address of the adapter.
- 82 -