Table of Contents
Advertisement
Tips
4> When the menu is displayed, select the port connected to the Fibre Channel device. Then, you
see the information window.
01: LPe1250-F8-N : Bus#: 30 Dev#: 00 Func#: 00
Mem Base: E7B40000 Firmware Version : OS2.01A12 Boot BIOS: Disabled!
Port Name: 10000090FA21128 Node Name: 20000090FA21128
Topology: Auto Topology: Loop First (Default)
5> Select "Reset Adapter Defaults" to set this product's configuration to defaults. Then press <y> when
this message is displayed.
Reset Adapter Configuration to Defaults? (Y/N) :
If the above menu is not displayed and the window has gone to the next one,
press <Alt>, <Ctrl> and <Del> keys simultaneously to reboot the computer. Then,
start the steps from the beginning.
The menu sample is just for your reference. Some of them may be different
depending on the computer or its configurations.
Emulex LightPulse FC BIOS Utility. OB2.12a15
Enable/Disable Boot from SAN
Scan for Target Devices
Reset Adapter Defaults
Configure Boot Devices
Configure Advanced Adapter Parameters
Enter ＜Esc> to Previous Menu
<↑/↓> to Highlight, <Enter> to Select
Copyright (c) 1997-2014 Emulex. All rights reserved.
- 65 -
Advertisement
Table of Contents
