4> Execute "hbacmd listhbas" and confirm all this product's WWPN address are manageable.
Tips
C:\Program Files\Emulex\Util\OCManager>hbacmd listhbas
Manageable HBA List
Port WWN : 10:00:00:90:fa:02:11:28
Node WWN : 20:00:00:90:fa:02:11:28
Fabric Name : 00:00:00:00:00:00:00:00
Flags : 8000e200
Host Name : 1-1818-2900141
Mfg : Emulex Corporation
Serial No. : FC23711953
Port Number : 0
Mode : Initiator
PCI Bus Number : 96
PCI Function : 0
Port Type : FC
Model : LPe1250-F8-N
5> Execute "hbacmd allnodeinfo" for this product (by WWPN address) which will be set binding, and
confirm the "Node Type" is "READY" and check the value of "SCSI Bus Number" and "SCSI Target
Num" for the all tape storages and disk arrays.
C:\Program Files\Emulex\Util\OCManager>hbacmd allnodeinfo 10:00:00:90:fa:02:11:2
8
Node Type : READY
FCP ID : B3
SCSI Bus Number: 0
SCSI Target Num: 0
Node WWN : 20:00:00:16:97:12:24:46
Port WWN : 21:00:00:16:97:12:24:46
OS Device Name : \\.\Scsi5:0:0
WWPN address is displayed "Port WWN" on the command prompt.
- 79 -