9> Select "Commit Changes" and press <Enter> when this menu is displayed.
LUN: 0000 Mode: Peripheral dev
LPe1250-F8-N Node Name : 20000090FA211128
▶ Commit Changes
▶ Discard Changes
10> When displaying list of the discovered targets again, select "Go to configuration Main Menu" and
press <Enter> to return to main menu.
11> Select "Delete Boot Device" and press <Enter> to display the registered Boot Devices list.
If there is no problem in this list, press <Esc> to return to main menu.
LPe1250-F8-N Node Name : 20000090FA211128
01: WWN:21000016 97122446 [KEEP]
02: WWN:00000000 00000000 [KEEP]
03: WWN:00000000 00000000 [KEEP]
04: WWN:00000000 00000000 [KEEP]
05: WWN:00000000 00000000 [KEEP]
06: WWN:00000000 00000000 [KEEP]
07: WWN:00000000 00000000 [KEEP]
08: WWN:00000000 00000000 [KEEP]
▶ Discard Changes
▶ Commit Changes
Tips
12> Select "Set Boot from SAN" and press <Enter> from main menu.
001: LPe1250-F8-N PCIe2.5Gb/s , x8
LPe1250-F8-N Node Name : 20000090FA211128
Seg#: 000 Bus#: 40 Dev#: 00 Func#: 00
RECONNECT DEVICES
Set Boot from SAN [Disable]
▶ Scan for Fibre Devices
▶ Add Boot Devices
▶ Delete Boot Device
▶ Change Boot Device Order
▶ Configure HBA and Boot Parameters
▶ Set Emulex Adapter to Default Settings
▶ Display Adapter Info
If there are any wrong Boot Devices, select the wrong device and press <Enter>.
The device appears with [DELETE], and then you select "Commit Changes" and
press <Enter> to delete wrong Boot Devises.
- 73 -