SILENT10 PORTABLE AIR CONDITIONER USER MANUAL Thank you for choosing ElectriQ Please read this user manual before using this innovative Air Conditioner and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals...
SAFETY INSTRUCTIONS Important! • Carefully read the instructions before operating the unit • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • Installation must be in accordance with regulations of the country where the unit is used. •...
FEATURES AND PARTS LIST 1. Features Self-evaporative system - no external water tank needed Designer inspired luxury model Bright LED screen, indicates temperature and operation mode On/Off timer function – allows you to choose when the unit operates Compressor protection technology 2.
INSTALLATION Installation Warning Before using this unit, please keep it upright for at least 3-4 hours. This unit can easily be moved from one room to another. While moving the unit please note that it must always be kept upright and then placed on an even surface.
5. Make sure the unit is upright and there are no obstructions to the air inlets and outlet grills 6. Fix the other end of the hose to the air-outlet window kit Note: The window kit is only designed to be installed with sliding or sash windows or doors. The window kit is not designed or to be used with any other style of windows.
OPERATION AND SETTINGS This portable air conditioner boasts 3 functions: cooling, dehumidifying and fan. The fan has two speeds: high and low. Temperature range settings are: 16-31 C The unit will also display operating function, temperature, fault diagnostic and protective functions on the LCD screen.
1.7 Sleep mode key In cooling mode, press the key and the unit will go into sleeping mode. Press again to cancel. It increases the target temperature with 1 C after an hour and readjust to 2 C increase after 2 hours. Sleep mode is not operational under dehumidification and fan only mode.
3.3 Compressor delay-protection Except for the first power-on, the compressor can start instantly. The compressor also runs under a 3 minute delay protection function. 3.4 Compressor protection In cooling, dehumidifying and heating mode, if the temperature difference between the coil temperature and room temperature is less than 3 C, for more than 30 minutes, the machine will enter ‘no refrigerant’...
Maintenance Cleaning Please shut off the unit and unplug from the mains before cleaning or performing any maintenance Clean the surface Clean the plastic housing with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage.
Troubleshooting Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate the warranty and may cause bodily harm. Trouble Reason Solution No power supply Power-on and turn on the unit. Water-full indicator illuminated Drain the internal water tank The unit does Timer function is active Cancel Timer function...
APPENDIX Disposal: Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils.
Page 13
ElectriQ UK SUPPORT www.ElectriQ.co.uk/support Please, for your own convenience, make these simple checks before calling the service line. If the unit still fails to operate call: 0871 620 1057 or complete the online form 1. Has the unit been standing upright for at least 2 hours? 2.
Need help?
Do you have a question about the SILENT10 and is the answer not in the manual?
Questions and answers