Table of Contents
Advertisement
If the scancode is remapped to a function or a macro, the first and second columns remain blank while the third
column contains the function name or macro key number (e.g., Macro 2).
Adding a Remap
To add a new remapping:
•
Tap the Add button at the bottom of the dialog box.
The Remap Scancode dialog box is displayed.
•
Type the scancode in hexadecimal in the field labelled Scancode.
NOTE
The Label field displays the default function of the scancode you are remapping.
Virtual Key, Function and Macro
The radio buttons at the bottom of the dialog box allow you to define to what the scancode will be remapped to:
Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the virtual key is sent. If No
Force is selected, the shift state is dependent on whether the shift state is on or off at the time the virtual key
is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the dialog box.
•
Choose Virtual Key>Function or Macro.
•
Choose a function from the Function list, and tap on OK.
Editing a Scancode Remap
•
In the Scancode Remapping tab, tap on the remap you want to edit.
•
Tap on the Edit button, and make the appropriate changes.
•
Tap on OK to save your changes.
Removing a Remap
•
In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Menu button,
and choose Remove.
•
Tap on OK.
Draft #6
Settings 4 - 43
Advertisement
Table of Contents
