4 - 24 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
7. Type the User Name, Password and Domain Name as provided by your ISP or
network administrator.
NOTE
Generally, you will not need to change any of the Advanced settings. For information
about Advanced Modem Settings, review the next section.
Changes to Advanced settings are only required in the following instances:
- To change the baud rate settings, dialing string commands or credit card options.
- To change port settings.
- To enter TCP/IP settings because the server to which you are connecting does not
dynamically assign addresses.
8. Tap on the Finish button.
Advanced Modem Settings
TCP/IP Settings Tab
If your server assigns IP addresses dynamically, you will not need to change these settings. If you need to
make changes, contact your ISP or network administrator for addresses.
Server Settings Tab
If your server assigns IP addresses dynamically, you will not need to change these settings.
Draft #6