Table of Contents
Advertisement
•
Click in the checkbox to the left of the service to activate it.
•
Click on Done.
NOTE
If you choose a service requiring additional information, associated dialog box is auto-
matically displayed where further details can be completed.
Once you've completed the information:
•
Tap on Next and then in the Services screen, tap on OK.
Servers Tab
When a remote Bluetooth device initiates a Bluetooth connection to the Workabout Pro4, the remote device is
considered the 'Bluetooth master' and the hand-held, the 'Bluetooth slave'. In order for the remote device to
connect to the Workabout Pro4, the Workabout Pro4 must offer a service in the form of a server. The Servers
tab allows these services to be enabled and configured. There are three server services available: Serial,
Scanner and OBEX OPP (Object Exchange-Object Push Profile).
Serial server enables the Serial Port Profile server; a Serial Port can be selected from the drop-down menu.
Keep in mind that when a port is chosen, an application must be open (connected) to the chosen port for a
remote device to be able to connect.
Scanner server enables a Serial Port Profile server and then relays it to the Scanner Service (SCS). This is
used for Bluetooth barcode scanners that operate in client mode. SCS opens the server port and handles the
scanner input.
Draft #6
Settings 4 - 17
Advertisement
Table of Contents
