4 - 30 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
To set up the proxy server connection manually, you'll need the following information: proxy server name,
server type, port, type of Socks protocol used, and the user name and password.
•
Tap Start>Settings. Tap on the Connections tab followed by the Connections icon.
•
Under My Work Network, tap on Set up my proxy server.
•
Tap in the checkbox next to This network connects to the Internet and This network uses a proxy
server to connect to the Internet.
•
In the Proxy server field, type the proxy server name.
•
Tap on OK to save your changes.
NOTE
If you need to change advanced settings such as a port number or proxy server type,
you'll need to tap on the Advanced button rather than tapping on OK. Advanced set-
tings are described in "Changing Advanced Proxy Server Settings" in the next section.
Changing Advanced Proxy Server Settings
•
To change advanced settings such as the port number or proxy server type, tap on the Advanced button.
•
Tap on the proxy type you want to change. For the appropriate server type, type the proxy server name
and port.
•
Tap on OK.
Selecting a Network
NOTE
Normally, you will not need to change these settings. Contact your ISP or network
administrator before making any changes.
Draft #6