•
Key Index: This field becomes available if you deselect The key is automatically provided. This field is
used to identify the WEP key.
•
Tap on Next to display the screen in which you can choose the EAP (Extensible Authentication Proto-
col) type.
When Use IEEE 802.1x network access control is enabled, EAP types are available in the drop-down menu.
The items will vary depending on your network setup.
Keep in mind that some authentication protocols require that you select a Certificate. By tapping on the Proper-
ties button, you can select a Certificate.
•
Tap on Finish when the configuration is complete.
Draft #6
Wireless Zero Config Settings C - 5