Drive The Digital Output - Vivotek IZ7151 User Manual

endtime
prefix
cyclesize
maxfilesize
dest
Group: path
NAME VALUE
encoder1_start <boolean>
encoder2_start <boolean>

Drive the Digital Output

Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=<return page>]
Where state is 0 or 1; "0" means inactive or normal state, while "1" means active or triggered state.
PARAMETER VALUE
do<num> 0, 1
return <return page>
Example: Drive the digital output 1 to triggered state and redirect to an empty page.
http://myserver/cgi-bin/dido/setdo.cgi?do1=1
hh:mm 6/6
string[16] 6/6
<integer> 6/6
200~6000 6/6
0~4 6/6
SECURITY
(get/set)
7/7
7/7
DESCRIPTION
0 – Inactive, normal state
1 – Active, triggered state
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.
End time of the weekly schedule.
(00:00~24:00 indicates schedule always on)
Indicate the prefix of the filename.
The maximum size for cycle recording in Kbytes
when choosing to limit recording size.
The max size for one file in Kbytes
The destination to store the recorded data.
"0~4" means the index of the network storage.
DESCRIPTION
Specify the HTTP push server is active for stream 1
Specify the HTTP push server is active for stream 2
VIVOTEK
User's Manual - 99