Table of Contents
Advertisement
VIVOTEK
rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to live�sdp:
1
:
Launch a RTSP player�
2
Choose File > Open URL. This opens the URL dialog box.
:
3
Type the URL command in the text box�
:
For example:
4
The live video will be displayed in your player�
:
RTSP port /RTP port for video, audio/ RTCP port for video, audio
Protocol) controls the delivery of streaming media� By default, the port number is set to 554�
The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients� By
default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558�
The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data
by monitoring Internet traffic volume� By default, the RTCP port for video is set to 5557 and the
RTCP port for audio is set to 5559�
The five ports can be changed between 1025 and 65535� The RTP port must be an even number
and the RTCP port is RTP port number plus one, and thus always be odd� When the RTP port
changes, the RTCP port will change accordingly�
If the RTP ports are incorrectly assigned, the following warning message is displayed:
Multicast settings for stream 1 / Multicast settings for stream 2
enable multicast for stream 1 or stream 2� Unicast video transmission delivers a stream through
point-to-point transmission; multicast, on the other hand, sends a stream to the multicast group
34 - User's Manual
The RTSP (Real-Time Streaming
:
Select the Always multicast to
:
Advertisement
Table of Contents
