Vivotek IZ7151 User Manual page 106

VIVOTEK
IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE
Method addallow
adddeny
deleteallow
deletedeny
start <ip address>
end <ip address>
index <value>
return <return page>
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
106 - User's Manual
DESCRIPTION
Add allowed IP address range to the server. Start and end parameters
must be specified. If the index parameter is specified, it will try to add
starting from the index position.
Add denied IP address range to the server. Start and end parameters must
be specified. If the index parameter is specified, it will try to add starting
from the index position.
Remove allowed IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position.
[start, end] parameters have higher priority then the [index] parameter.
Remove denied IP address range from server. If start and end parameters
are specified, it will try to remove the matched IP address. If index is
specified, it will try to remove the address from given index position.
[start, end] parameters have higher priority then the [index] parameter.
The starting IP address to add or to delete.
The ending IP address to add or to delete.
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty page.