Installing Driver For Aec-6811A - Aaeon AEC-6811A Manual

E m b e d d e d C o n t r o l l e r A E C - 6 8 1 1

4.3 Installing Driver for AEC-6811A

Installing VGA Driver
Win XP / Win XPe VGA
Place the Driver CD-ROM into your CD-ROM drive and follow the
steps below to install.
1. Click on Start button
2. Click on Settings button
3. Click on Control Panel button
4. Click on System button
5. Select Hardware and click on Device Manager...
6. Double click on Video Controller (VGA Compatible)
7. Click on Update Driver...
8. Click on Next
9. Select Search for a suitable driver..., then click on Next
10. Select Specify a location, then click on Next
11. Click on Browse
12. Select "lx_win" file from CD-ROM (Drivers/Step 1 –
LX_Graphics) then click on Open
13. Click on OK
14. Click on Next
15. Click on Yes
16. Click on Finish
Note: The user must install this system driver before install other
device drivers.
4-4
Chapter 4 Driver Installation