Installation
AC Terminal Block
(AC input and output wiring)
SI/SO wiring (≤ 30A)
MS-G Inverter
GFCI
See NOTE below
ON
ON
OFF
OFF
30
Maximum 30-amp breaker
(single pole) required to
inverter AC input
NOTE: In mobile installations, the
neutral is typically not connected to
ground in main panel.
120
VAC
Direct from Inverter
Main Panel
(Inverter Loads)
(Utility/Generator Input)
Figure 2-12, AC Wiring for Single In (30A) – Single Out Confi guration
Page 25
© 2015 Sensata Technologies