Sensata Magnum-Dimensions MagnaSine MS-G Series Owner's Manual page 64

Appendix A – Specifi cations
A-4 Optional Equipment and Accessories
The following Sensata components are available for use with the MS-G Series inverter/charger.
Some of these items are required depending upon the intended use of the inverter.
MMP Series Enclosures
The MMP enclosures have been specifi cally designed for single inverter applications. These
enclosures combine all of the major components required for a renewable energy system—inverter/
battery disconnect, AC overcurrent protection, grounding connections, and a full system inverter
bypass switch as a convenient way to isolate the inverter for battery maintenance—into a single,
easy to install pre-wired enclosure.
Remote Switch Adapters
The ME-RSA and ME-RSA-M pigtail adapters allow the inverter to be remotely switched on and
off—with or without a remote display.
Advanced Remote Control
The ME-ARC remote control panel uses an LCD screen and at-a-glance LEDs to provide operating
information and allow advanced features to be confi gured (requires a Magnum inverter with
advanced confi gurable features). This LCD remote control also provides advanced monitoring/
troubleshooting and includes a FAVS button to access your favorite features quickly.
Standard Remote Control
The ME-RC remote control panel uses an LCD screen and at-a-glance LEDs display for complete
inverter/charger status. Soft keys provide simple access to menus, and a rotary encoder knob
allows you to scroll through and select a wide range of settings such as: Inverter ON/OFF, Charger
ON/OFF, shorepower breaker setting, AGS control, METER button, SETUP and TECH menus.
Auto Generator Start Controller
The ME-AGS-N Automatic Generator Start controller (Network version) is designed to automatically
start your generator based on low battery condition or high temperature. The AGS controller
includes an input voltage jumper (for 12, 24, and 48-volt battery banks) and a 4-position DIP
(Dual In-line Package) switch which provides the ability to change the relay timing confi gurations
to allow compatibility with a wider range of generators. Adjustable settings when using the ME-
ARC include starting the generator based on battery voltage, time of day, battery State of Charge
(SOC), or high temperature.
Battery Monitor Kit
The ME-BMK-NS Battery Monitor Kit is a single battery bank amp-hour meter that monitors the
condition of the battery, provides information to let you know how much energy you have available,
and lets you plan your electrical usage to ensure the battery is not being over-discharged. The
–NS version does not include a DC shunt. Order PN: ME-BMK to receive the battery monitor that
includes the 500A/50mv DC shunt.
Note: The DC shunt is included with the MMP Series enclosure. Order the ME-BMK-NS version
when installed with the MMP enclosure.
ME-CB and MPX-CB Conduit Boxes
The ME-CB and MPX-CB conduit boxes are provided for installations where the electrical code
requires AC and/or DC wiring to your inverter to be enclosed and protected by conduit.
© 2015 Sensata Technologies Page 56