Set Operation Modes - Ricoh Priport JP5000 Operating Instructions Manual

USER TOOLS
No. Mode
8 Time Setting
9 Auto Online
3
10 Data Print

2. Set Operation Modes

No. Mode
1 Min. Quantity
2 Max. Quantity
136
Description
Use to set the machine's internal clock.
Note
The clock must be adjusted if you change the clock to
daylight saving time/summer time, or return to stan-
dard time.
Reference
For how to set the clock, see ⇒ P.148 "1-8 Time Setting".
Specifies whether On Line mode is automatically selected
when the machine detects the data from the personal com-
puter.
Note
Default: ON
Use to print out the following data.
Note
Available settings:
• Log Data (Number of prints made, how many times
paper misfeeds occur and so on.)
• Reset Counters (Number of prints and master made
under each user code)
• Store Class (Registered number of students in each
class.)
Description
The minimum print quantity can be set between 0 and 9999.
Example: If you specify 20 as minimum number of prints,
runs of 20 or more prints will be accepted, runs of less then
20 prints will not be accepted.
Note
Default: 0
The maximum print quantity can be set between 0 and 9999.
Note
Default: 9999