Ricoh Priport JP5000 Operating Instructions Manual page 169

2 Reset Counters
3 Reg. User Code
4 Chg. User Code
5 Del. User Code
6 Key Operator
Code
7 Reg/Chg Key-
OpCode
8 Restricted Access
You can clear each or all user codes' counters.
Note
Default: Single
Reference
For how to clear the number of masters and copies, see
⇒ P.163 "6-2 Reset Counters".
You can register user codes.
Note
Up to 20 user codes (up to 4 digits) can be registered.
You can change user codes.
Note
The number of copies made under the old code is add-
ed to that made under the new user code.
Reference
For how to change the user codes, see ⇒ P.163 "6-4
Chg. User Code".
You can delete user codes.
Note
The number of copies made under the deleted code is
also deleted.
Reference
For how to delete the user codes, see ⇒ P.164 "6-5 Del.
User Code".
Sets Key Operator Code mode.
Note
Default: Not to use
You can register or change key operator codes. (up to 4
digits)
In Key Counter mode, you have to set the key counter be-
fore making prints. (To turn on Key Counter mode, con-
tact your service representative.) If Key Counter mode is
on, Restricted Access is turned on (To use) automatically.
If you turn Restricted Access off (Not to use), you can
make prints without inserting the key counter.
Note
Default: Not to use
User Tools Menu
3
147