Ricoh Priport JP5000 Operating Instructions Manual page 130

OPTIONAL FUNCTIONS
E
Select the mode for the first com-
mand sheet with the [← ← ← ← ], [→ → → → ],
{~}, { { { { } } } } } } } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key.
2
F
Press the [OK] key.
G
If necessary, select the pattern for
the first command sheet with the
{ { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key. Then
press the [OK] key.
H
If necessary, select the size and
direction of the pattern you se-
lected in step G G G G with the [← ← ← ← ], [→ → → → ],
{ { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
I
Press the [OK] key.
Note
Follow steps B – I for the other
command sheets.
You can select a pattern regis-
tered with the user tools for
only one command sheet.
To change the value entered,
press the {Clear/Stop} key and
enter the new value.
108
J
After you have finished designat-
ing modes for all the command
sheets, select [Outside Area] with
the [← ← ← ← ], [→ → → → ], { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
Then press the [OK] key.
TPES530E
K
Select the mode for the outside
area with the [← ← ← ← ], [→ → → → ], { { { { ~ ~ ~ ~ } } } } , or
{ { { { } } } } } } } } key.
L
Press the [OK] key.
Note
When you select Photo mode
for both inside and outside ar-
eas, you cannot select different
coarseness and image density.
When you want to confirm your
settings, press the {Make-Up}
TPES530E
key twice. Then press the [OK]
key repeatedly until the panel
display reaches the setting you
want to confirm.
M
When you select Photo mode, se-
lect the coarseness and image
TPES530E
TPES530E