Filter [Filter] - OHAUS Ranger Count RC1P1502 Instruction Manual

Ranger™ Count 3000 Series
4.4 Readout Menu
Enter this menu to set user preferences. Default settings are in bold.
Reset:
Stable Range:
Filter:
Auto-Zero Tracking: off, 0.5, 1, 3
Light:
Auto off:
End Readout:
Reset [reset]
Reset the Read menu to factory defaults.
NO = not reset
YES = reset
Stable Range [Stable]
Set the amount the reading can vary while the stability symbol remains on.
0.5d = 0.5 scale division
1d = 1 scale division
2d = 2 scale division
5d = 5 scale division

Filter [FILtEr]

Set the amount of signal filtering.
LOW = less stability, faster stabilization time
MED = normal stability, stabilization time
HI = greater stability, slower stabilization time
AZT [AZt]
Set the automatic zero tracking functionality.
OFF = disabled
0.5d = the display will maintain zero until a change of 0.5 divisions per second has
been exceeded.
1d = the display will maintain zero until a change of 1 divisions per second has been
exceeded.
3d = the display will maintain zero until a change of 3 divisions per second has been
exceeded.
Light [LIGHt]
Sets backlight functionality.
OFF = always off
ON = always on
AUTO = turns on when a button is pressed or the displayed weight changes.
Auto off [A.OFF]
Set the automatic shut off functionality.
OFF = disabled
1 = powers off after 1 minute of no activity
5 = powers off after 5 minute of no activity
10 = powers off after 10 minute of no activity
End Readout [End]
Advance to the next menu or return to the top of the current menu.
no, yes
0.5, 1, 2, 5
low, medium, high
off, on, auto
off, 1, 5, 10
Exit menu
EN-17