Language; User Setting; Filter Level; Auto Zero Tracking - OHAUS Adventurer AX224 Instruction Manual

ADVENTURER BALANCES
Factory default settings are shown below in bold.
5.3.2

Language

Set the language displayed for menus and displayed
messages.
English
German
French
Spanish
Italian
Polish
Turkish
Czech
Hungarian
5.3.3

User Setting

Use this sub-menu to change the setting for:
Touch Calibrate
"Runtime calibration, please touch the screen at the center of the ring"
(First top-left, then bottom-right.)
Screen Brightness:
LOW = low screen brightness.
MEDIUM = normal screen brightness.
HIGH = high screen brightness.
Beep:
OFF = disabled
ON = enabled
Auto Dim (Dims the display if no Screen Activity for x minutes)
OFF = disabled
10 min
20 min
30 min
Level Assist: Instructions on how to move the balance feet to level the balance.
5.3.4

Filter Level

Set the amount of signal filtering.
LOW = faster stabilization time with less stability.
MEDIUM = normal stabilization time with normal stability.
HIGH = slower stabilization time with more stability.
5.3.5

Auto Zero Tracking

Set the automatic zero tracking functionality.
OFF =
0.5 D =
1 D =
3 D =
5.3.6

Auto Tare

Set the automatic Tare.
OFF = disabled.
ON = enabled.
'Place container on the pan' will be displayed when an Automatic Tare is about to
start.
A Deactivate button is displayed underneath the text. Press this button to
deactivate the Automatic Tare function
disabled.
display maintains zero up to a drift of 0.5 graduation per
second
display maintains zero up to a drift of 1 graduation per second.
display maintains zero up to a drift of 3 graduations per
second.
EN-31