Page 1
RANGER COUNT 3000 Scale Interface Instruction Manual 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
Page 2
Scale Interface EN-1 INTRODUCTION This Second Scale interface Kit is for use with the Ohaus product Ranger Count 3000. Through this kit you can connect additional platform with Ranger Count 3000. KIT CONTENTS 2 Pressure Button Scale PC Board ...
Page 3
EN-2 Scale Interface SETUP After the main platform is connected to the 2 weighing platform, switch on the Dual Scale (D.Scale) menu item in the SETUP menu (see menu structure below). Then set the CAP2 and Grad2 in the SETUP menu and do a calibration. Press and hold the key to switch between the main platform and the secondary platform.