Specifying The Original Size When The Bypass Tray Is Selected - Ricoh Aficio MP 1800 Operating Instructions Manual

Placing Originals
E
Enter the vertical size of the original (Vert.) with the number keys, and then
press the {OK} key.
1
The "
Programmed
When the custom size originals settings are registered,
on the top of the copy display.
Note
❒ This function is not available in Auto Paper Select mode.
❒ If you make a mistake in step
enter the value again.
❒ To cancel the size you have set, press the {Clear Modes} key.

Specifying the Original Size When the Bypass Tray is Selected

You can select either regular or custom for the size of the original when the by-
pass tray is selected.
Regular sizes
When placing regular size originals on the exposure glass, or in the ADF or AR-
DF, select the size of the originals from the regular sizes shown on the display.
A
Select [Bypass] using {U} or {T}.
B
Press the {q} key.
18
" message appears.
D
or
, press the {Clear/Stop} key, and then
E
appears