Table of Contents
Advertisement
Appendix
❖ Duplex (Type 2 only)
• The following paper sizes and orientations can be duplexed.
A3L, B4 JISL, A4KL, B5 JISKL, A5KL, 11" × 17"L, 8
" × 13"L, 8
1
8
/
2
" × 10
1
7
/
4
• You cannot use the following paper with this function:
• Paper smaller than A5 (7
• Paper thicker than 90 g/m
• Paper thinner than 64 g/m
3
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Thick paper
• Envelopes
• When an odd number of originals is placed in the ADF or ARDF, the back
of the last page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
❖ Combine
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on paper size and the number of originals.
• The selectable reproduction ratios are 50–200 %.
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within the available range. However, with some ratios, parts of
the image might not be copied.
• If the orientation of originals is different from that of the paper, the ma-
chine will automatically rotate the image by 90° to make copies properly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment is left blank as shown.
❖ Duplex Margin (Type 2 only)
• If you set a binding margin that is too wide, parts of the image may not be
copied.
• When making copies using the Combine function, a binding margin is
added to copies after the images are combined.
62
" × 11"KL, 8
1
/
2
1
/
"KL, 8KL, 16KKL
2
1
/
" × 14"L, 8
1
1
/
/
4
4
" × 10
1
/
")
4
2
2
(24 lb.)
2
(17 lb.)
" × 14"L,
1
/
2
" × 13"L, 8" × 13"L,
Advertisement
Table of Contents
