Technibel GRV79R5VAA Technical Data & Service Manual page 88

Mounting the Remote
Control Unit
Removable mounting
Mounting on a wall
OI-858-11EG
Using the Remote Control Unit (continued)
Wall
(Packed in the
indoor unit)
A. Removable mounting
1) Momentarily hold the remote control unit at the desired
mounting position.
2) Confirm that the air conditioner responds correctly when you
press keys on the remote control from that position.
3) After confirming correct operation, use a screwdriver to screw
the mounting screw into the wall.
4) Hang the remote control unit from the mounting screw.
B. Non-removable mounting
1) Momentarily hold the remote control unit at the desired
mounting position.
2) Confirm that the air conditioner responds correctly when you
press keys on the remote control from that position.
3) After confirming correct operation, use a screwdriver to screw
the mounting screw into the wall.
4) Remove the batteries of the remote control unit.
5) Use a screwdriver to screw the remote control unit securing
screw into the wall through the hole in the battery compartment.
6) Replace the batteries.
7) Again confirm that the remote control unit operates correctly.
Non-removable mounting
(Packed in the
indoor unit)
Wall
11