Table of Contents
Advertisement
les personnes et ne doit pas ê tre colocalisé ou fonctionner conjointement avec une autre antenne ou un autre
é metteur.
The host product shall be properly labeled to identify the modules within the host product.
The Innovation, Science and Economic Development Canada certification label of a module shall be clearly visible
at all times when installed in the host product; otherwise, the host product must be labeled to display the Innovation,
Science and Economic Development Canada certification number for the module, preceded by the word "Contains"
or similar wording expressing the same meaning, as follows:
"Contains IC: 10224A-2021SC20AD" or "where: 10224A-2021SC20AD is the module's certification number".
Le produit hô te doit ê tre correctement é tiqueté pour identifier les modules dans le produit hô te.
L'é tiquette de certification d'Innovation, Sciences et Dé veloppement é conomique Canada d'un module doit ê tre
clairement visible en tout temps lorsqu'il est installé dans le produit hô te; sinon, le produit hô te doit porter une
é tiquette indiquant le numé ro de certification d'Innovation, Sciences et Dé veloppement é conomique Canada pour le
module, pré cé dé du mot « Contient» ou d'un libellé semblable exprimant la mê me signification, comme suit:
"Contient IC: 10224A-2021SC20AD" ou "où : 10224A-2021SC20AD est le numé ro de certification du module".
❒ LTE Band 2 :≤2.000dBi
❒ LTE Band 4:≤2.000dBi
❒ LTE Band 5 :≤2.000dBi
❒ LTE Band 7 :≤3.000dBi
❒ LTE Band 12 :≤3.000dBi
❒ LTE Band 13:≤4.000dBi
❒ LTE Band 25:≤2.000dBi
❒ LTE Band 26:≤2.000dBi
1.1. Safety Information
The following safety precautions must be observed during all phases of operation, such as usage, service
or repair of any cellular terminal or mobile incorporating SC20 module. Manufacturers of the cellular
terminal should send the following safety information to users and operating personnel and to incorporate
these guidelines into all manuals supplied with the product. If not so, Quectel assumes no liability for the
customer's failure to comply with these precautions.
Full attention must be given to driving at all times in order to reduce the risk of an
accident. Using a mobile while driving (even with a handsfree kit) causes
distraction and can lead to an accident. You must comply with laws and regulations
restricting the use of wireless devices while driving.
Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it is
switched off. The operation of wireless appliances in an aircraft is forbidden, so as
to prevent interference with communication systems. Consult the airline staff about
the use of wireless devices on boarding the aircraft, if your device offers an
Airplane Mode which must be enabled prior to boarding an aircraft.
SC20-A_Manual_R1.0
Confidential / Released
7 / 57
Advertisement
Table of Contents
