D315 | D305 User Manual
Using different dialing methods
Auto dial
Note: The default setting is off. In admin mode, the setting can be enabled on the
Advanced Settings page, Behavior tab, Phone Behavior section, Auto Dial setting by
selecting a time span in seconds from the drop-down menu.
When the setting is enabled, the phone will dial the number on the display when the specified number
of seconds has elapsed since the last digit was typed.
Redialing
1. Press
to show the last numbers dialed, with the very last number at the top.
2. Press
to dial that number or use
Calling number from call history (missed, received, dialed calls)
1. Press
(dialed calls),
2. Use / to select a call.
3. Press
to dial the number.
Calling number from phone directory
1. Press the function key underneath
page 18) to open the phone's directory.
2. Use
/
to select a name or enter the first letter(s) of the name on the alphanumeric keypad.
3. Press
to dial the number.
Calling number from external directory
1. Open the dial screen to get access to the external directory:
a. Lift the handset off the cradle or press the speakerphone key to open the dialing screen
(Fig. 1).
b. Press
to show the list of available directories and call lists.
c. Select the external directory, in our example LDAP (Fig. 2).
Fig. 1
2. Use
/
to select a name or enter the first letter(s) of the name on the alphanumeric keypad.
3. Press
to dial the number.
/
to select a different number and then press
(received calls), or
(missed calls) to open the respective call list.
or key P3 (factory default setting - see "At a glance" on
Fig. 2
46
Using the Phone
.