Table of Contents
Advertisement
When the power module is in the charged state, the four battery
capacity indicator (red) lights on the left side will be bright, which only
represents the highness of the current charge voltage, but the capacity of
the battery.
2.3.2 Battery charging
<1> Whether the battery capacity is in adequacy, every time the AC power
adapter is inserted into "POWER INPUT "on the Fusion Splicer power
module, the power module will start a charging process.
<2> Display of charged state: During the charging, the charging indicator
(CHARGE) light is red; after the charging completion, the charging
indicator (CHARGE) will be green.
<3> When the splicer is shut down, the maximum charging time is three
hours 40 minutes, and the shortest is 40 minutes. The length of the
charging time is dependent on the current battery capacity of the splicer.
<4> If the splicer is charged when it is active, the charging time should be
longer. The user is recommended to charge the battery when the splicer
is shut down, thus the charging time will be shortened.
2.3.3 Under Voltage Alarm
This model of fusion splicer has the function of "Under Voltage Alarm".
If the capacity of the lithium battery is lower than the specified value (the
default value is around 10.3V), the splicer will automatically alarm and
Website: www.baudcom.com.cn
Tel: +86 21 37709251
Email: info@baudcom.com.cn
Advertisement
Table of Contents
