Table of Contents
Advertisement
The battery pack uses chemical reaction. The capacity decreases at low
●
temperature, especially at lower than 0 degree.
At high altitude, the arc discharge current is increased. In this condition,
●
battery power degrades faster due to large power consumption.
The AC/DC adapter is not the model supplied by the Company, or the
●
charging time is not long enough.
"CHARGE" LED on AC adapter blinks during battery recharge
Atmospheric temperature is too high (more than 50 degrees C), or the
●
battery pack is charged under exposure to sunlight.
The battery pack has a fault or has reached the end of its service life.
●
Install a new battery pack. If the LED blinks again after install, contact
your nearest sales agency.
The AC/DC adapter is not the model supplied by the Company.
●
Website: www.baudcom.com.cn
Tel: +86 21 37709251
Email: info@baudcom.com.cn
Advertisement
Table of Contents
