installed with blade to the other side, and then cut the fiber.
2.7.5 Hold the cutter by left hand and open the big clip by right hand and
remove the fiber chips to put them in fixed containers.
2.7.6 Pinch and hold the fiber with the left hand, and open the small clip
with the right hand at the same time, and carefully remove the fiber.
●
Notes: The clean cross-section of fiber cannot touch other things.
2.8 Place fiber
2.8.1 Open shielding cover and left and right fiber clips.
2.8.2 Put the good fiber end face in the V-shaped groove; ensure the tip of
the fiber between the tip of the electrode and V-shaped groove's edge.
Website: www.baudcom.com.cn
Tel: +86 21 37709251
Email: info@baudcom.com.cn