Turn On And Turn Off - Baudcom BD-FS-30 User Manual

Optical fiber fusion splicer
Table of Contents

Advertisement

immediately disconnect the charger when the battery is fully charged.
Huge damage may be incurred or accidents may occur on the lithium
battery if the battery fully charged is still under the charging state.
<7> The battery should be stored in a clean, dry and ventilated indoor
environment of temperature ranging –5℃~+35℃ and humidity of
65±20%RH.
<8> If the battery is stored for a long time, it should be charged with the
special charger provided by the Company once every 90 days. The life
of the battery may be extended if the battery is half fully charged in a
long time.
<9> It is prohibited to remove the battery without explicit approval or put
it into fire, to prevent explosion of battery.

2.4 Turn on and turn off

Turn on
Press
button on the operator panel until the LED indicator lights turn
from red to green, release the button
initial position, the screen shows the reset menu.
Turn off
Press
button on the operator panel until the LED indicator turn from
Website: www.baudcom.com.cn
. When all of the motors return to the
Tel: +86 21 37709251
Email: info@baudcom.com.cn

Advertisement

Table of Contents
loading

Table of Contents