Table of Contents
Advertisement
green to red, release the button
2.5 Display brightness control
When the external environment is different, the user can adjust the display
brightness for the convenience of the Fusion Splicer operation. Display
brightness control should be done in the "standby" operation interface.
<1> Press
or
brightness of the display.
<2> Press
to confirm the brightness changes, and return to "standby"
operation interface.
●
When the display brightness is moderate, the capacity loss can be
reduced, and the endurance of the battery can be prolonged.
2.6 Cover fiber protection sleeve
The installation of fiber protection sleeve
Website: www.baudcom.com.cn
, now the machine is turned off.
in the "standby" operation interface to change the
Tel: +86 21 37709251
Email: info@baudcom.com.cn
Advertisement
Table of Contents
