Table of Contents
Advertisement
● The tightening of the screw should not exceed the strength of fingers.
3.6 Set Calendar
This function sets the date and time in the calendar incorporated in the splicer.
<1> In the ［ Maintenance Men1］ Menu, press
select the [ Calendar ]
<2> Press
to enter [Current Calendar] interface. Move the cursor to
select the item to be changed. Press
<3> After completion of calendar setting, press
stored.
4. Change the spare lithium battery pack
Change the spare battery according to the following procedures.
4. 1 Open the cover of the battery case
Lean the Fusion Splicer; open the cover of the battery case which is
at the bottom of the Fusion Splicer. See the following picture:
Website: www.baudcom.com.cn
or
to adjust the value.
Tel: +86 21 37709251
Email: info@baudcom.com.cn
and move the cursor to
. The date and time are
Advertisement
Table of Contents
