Table of Contents
Advertisement
DTIM Interval
Enable WMM
Enable Short GI
Enabled AP Isolation
If you are not familiar with the setting items in this page, it's strongly recommended to keep
the provided default values; otherwise it may result in lower wireless network performance.
setting and is recommended.
This value determines the interval of the Delivery Traffic Indication
Message (DTIM). A DTIM field is a countdown field informing clients of
the next window for listening to broadcast and multicast messages.
When the Router has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM Interval value.
You can specify the value between 1-255 Beacon Intervals. The
default value is 1, which indicates the DTIM Interval is the same as
Beacon Interval.
WMM function can guarantee the packets with high- priority messages
being transmitted preferentially. It is strongly recommended enabled.
This function is recommended for it will increase the data capacity by
reducing the guard interval time.
This function can isolate wireless stations on your network from each
other. Wireless devices will be able to communicate with the Router
but not with each other. To use this function, check this box. AP
Isolation is disabled by default.
Table 5-19
-58-
User's Manual of WNRT-617
Advertisement
Table of Contents
